Share:


Compact Electromagnetic Flowmeter (FS200) (DN6 - DN1200)



Hydro-Air FS Series electromagnetic flowmeters are intended for fluid measurement in most industries, including water, wastewater, chemical, etc.

There are two basic components of an electromagnetic flowmeter. The detector includes the flow tube, isolating liner and measuring electrodes and the convertor responsible for signal processing, flow calculation, display and output signals.

The materials of construction of the wetted parts (liner and electrodes) should be appropriate for the type of application.

All the electromagnetic flowmeters are factory tested and calibrated. A calibration certificate is included for each of the flowmeters.

Technical Specifications:

  1. Flow Direction: Bi-Directional
  2. Diameter: DN6 - DN1200
  3. Accuracy: ± 0.5% of rate
  4. Repeatability: ± 0.2%
  5. Electrode Material: SS316L; Hastelloy C; Titanium; Tantalum
  6. Housing Material: SS304; Carbon steel; SS316L
  7. Liner Material: Rubber; PTFE; PFA
  8. Minimum Conductivity: > 20uS/cm
  9. Measurement Range: 0.3 to 10 m/s
  10. Operating Temperature: Depending on liner (Refer to the datasheet)
  11. Operating Pressure: 16 bar (DN6 - DN300); 10 bar (DN350 - DN1200); 40 bar is available upon request.
  12. Protection Class: IP65 (Compact); IP68 (Remote)
  13. Signal Output: Pulse, 4-20 mA, RS485 (Optional for HART, Profibus & GPRS)
  14. Power Supply: 240 VAC; 24 VDC
  15. Flange Connection: DIN; ANSI; JIS10K


 Inquiry - Compact Electromagnetic Flowmeter (FS200) (DN6 - DN1200)